Precision Automatic Liquid Dispenser Glue Dispensing Equipment CE Certified

 

 

 

 

1. Print Head with Direct – Connection Way
2. Precise Transport System
3. Automatic Stencil Cleaning System
4.Safe Distribution of Electric Control
5. Frame Structure of fully-automatic set-up
6. Humanized Operation Interface
7. Cut down the tranport rail ‘s length and add a buffer area of input and output to improve the prodution efficiency.
8. Printing area and buffer area work independently , print and board of input /output work at the same time to save the time.
9. Manufacture the product requsted higher –speed.

10.  Unique and new structure of calibration platform

11.  X,Y,θ adjust independantly ,has the higher and wider calibration range

PCB transport system is driven by stepping motor. Stepping motor is smarter than a/c motor as it separates the transport process into two stages.  It will drive the PCB at full speed in first stage. When the PCB close to the stopper, the stepping motor will reduce the speed to avoid PCB crashed to the stopper. Every PCB can be moved at its fastest way with the new transport system. 

Robust design of the PCB clamping system ensures long lasting accurate performance.  For any PCB , single or both sides , hard or soft , our clamping system can handle it easily . Side Clamping System can handle most of the PCB , while Z-axis PCB clamping system can handle warped PCB effectively .

The system can be programmed for a variety of dry, wet and vacuum cycle to clean the underside of the stencil. The cleaning paper is pressed on the stencil by two special design elastic tubes. The soft contact between cleaning paper and stencil can remove the solder paste residue effectively and reliably. 
Both end of the vacuum tube in wiper system are connected to the vacuum pump to ensure strong and stable vacuum pressure all over the tube.

5 . Automatic Stencil Positioning System

 

6 . Modify the parameters without stopping the machine

7 . Humanized Operation Interface

Humanized Operation Interface

 

2D Inspection System will take sampling of most important printed area to ensure the printing quality.

9 . Optics Vision System

Advanced upper/lower vision system raises PCB and stencil 's superposition .
Omni direction lamp-house ensures optics vision accuracy .
CCD X/Y axis is controlled by high precision servomotor and the most advanced ball screw ,
linear slide-rail combination ensures accurate image capture .

 

All cables are satisfied with CCC standard . Separation of signal and electric cable prevent interference and further enhance the accuracy and reliability . All control units are properly located in different position for easy identification and maintenance .